Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Delavan Two-Door Cabinet

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

Page 1 of 4

Thank you for purchasing the Delavan Two Door

Cabinet. This page lists all the contents included in

the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this product.

DELAVAN TWO DOOR CABINET

Missing hardware? Please call

800.606.6387 for replacements.

2 - large

screws

1 Fit pre-assembled dowels of partition into correspond-

ing holes of base assembly and secure with 2 large

screws as shown. Secure, but do not over tighten, screws

with a phillips head screwdriver.

WALL MOUNTING HARDWARE

4 - medium

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

18 - small

bolts

8 - large

bolts

23 - small

screws

26 - spring

washers

26 - flat

washers

4 - pull

bolts

16 - shelf

pins

1 - front frame

phillips head screwdriver

(We recommened the use of hand tools instead power tools)

1 - top

panel

1 - base

assembly

2 - side panels

(1 - left, 1- right)

1 - back panel

4 - adjustable

shelves

1 - partition

2 - pulls

NOTE: Do not over tighten

the screws

Made in Vietnam - r03 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
DELAVAN TWO DOOR CABINET Missing hardware? Please call 800.606.6387 for replacements. ASSEMBLY HARDWARE 2 - large screws 18 - small bolts 8 - large bolts 23 - small screws 26 - spring washers 26 - flat washers 4 - pull bolts 16 - shelf pins WALL MOUNTING HARDWARE Thank you for purchasing the Delavan Two Door Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
DELAVAN TWO DOOR CABINET NOTE: Do not over tighten the bolts B A B A A B 2 A) Place front frame onto clean, padded surface as shown. Fit dowels of partition into corresponding holes of front frame as shown. Make sure partition is orientated as shown during assembly. B) Attach base assembly to front frame with 4 large bolts, 4 spring washers and 4 flat washers as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver.
PAGE 3
DELAVAN TWO DOOR CABINET B A A B 6 A) With the assistance of another adult, position unit upright as shown. Insert 16 shelf pins at desired shelf heights. Place 4 adjustable shelves into assembly as shown. Make sure each shelf is securely supported by shelf pins. B) Attach 1 pull to each door with 2 pull bolts, using a screwdriver. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
DELAVAN TWO DOOR CABINET C plastic anchor wall F strap WALL wall bracket wall bracket large D screw A medium screw 7 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to top of unit using 2 medium screws as shown.