Assembly Instruction

DELAVAN MEDIA GAMING TOWER
Made in Vietnam - r05 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Fit pre-assembled dowels of fixed shelf into corre-
sponding holes of left and right side panels, and attach
with 4 large bolts, 4 spring washers and 4 flat washers
as shown. Secure, but do not over tighten, the bolts with
a phillips head screwdriver.
2 Fit dowels of left and right side panels into
corresponding holes of top panel and secure with 4
large screws as shown. Secure, but do not over tighten,
the screws using a screwdriver.
3 A) Fit dowels of left and right side panels of
assembled unit into corresponding holes of bottom panel
and secure with 4 large screws as shown.
B) Attach base assembly to assembled unit with 6 small
bolts, 6 spring washers and 6 flat washers as shown.
4 With the assistance of another adult, position assem-
bly upright as shown. Attach back panel with 21 small
screws, using a screwdriver.
A
B
left side
panel
right side
panel
fixed shelf
top panel
A
B
bottom
panel
base
assembly
back panel
NOTE: Do not over
tighten the screws
NOTE: Do not over
tighten the bolts
NOTE: Make sure pilot
holes of top panel are
facing up and towards
back during assembly