Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Delavan Media-Gaming Tower

COMPONENTS

Made in Vietnam - r05 Page 1 of 4

Thank you for purchasing the Delavan Media Gaming

Tower. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DELAVAN MEDIA GAMING TOWER

1 - fixed shelf

1 - top panel

1 - bottom panel

1 - base

assembly

2 - side panels

(1 left, 1 right)

1 - back panel

1 - door

front

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

8 - large

screws

WALL MOUNTING HARDWARE

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

6 - small

bolts

4 - large

bolts

21 - small

screws

10 - spring

washers

10 - flat

washers

2 - pull

bolts

12 - shelf

pins

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

1 - small adjustable

shelf

1 - pull

2 - hinges

2 - large adjustable

shelves

8 - hinge

screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
DELAVAN MEDIA GAMING TOWER Missing hardware? Please call ASSEMBLY HARDWARE 800.606.6387 for replacements. 21 - small screws 8 - hinge screws 8 - large screws 10 - spring washers 10 - flat washers 2 - pull bolts 6 - small bolts 12 - shelf pins 4 - large bolts 2 - hinges WALL MOUNTING HARDWARE Thank you for purchasing the Delavan Media Gaming Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
DELAVAN MEDIA GAMING TOWER NOTE: Do not over tighten the bolts NOTE: Do not over tighten the screws right side panel top panel fixed shelf left side panel NOTE: Make sure pilot holes of top panel are facing up and towards back during assembly 1 Fit pre-assembled dowels of fixed shelf into corresponding holes of left and right side panels, and attach with 4 large bolts, 4 spring washers and 4 flat washers as shown. Secure, but do not over tighten, the bolts with a phillips head screwdriver.
PAGE 3
DELAVAN MEDIA GAMING TOWER Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges A B A B door front 5 Attach 2 hinges to door front with 2 hinge screws per hinge as shown, using a screwdriver. 6 A) Attach door front to assembled unit as shown. Secure each hinge with 2 hinge screws. B) Attach pull to door front with 2 pull bolts as shown, using a screwdriver.
PAGE 4
DELAVAN MEDIA GAMING TOWER SAFETY MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. C F plastic anchor wall strap A small screw wall bracket A) Attach wall bracket to top of unit using 2 small WALL screws as shown. B) Determine the final location of unit.