Assembly Instruction

DELAVAN 62” MEDIA CONSOLE
Made in Vietnam - r08 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Fit pre-assembled dowels of partition into corre-
sponding holes of base assembly, and attach with 2
large screws as shown. Secure, but do not over
tighten, the screws with a phillips head screwdriver.
Make sure partition is orientated as shown during
assembly.
2 A) Place front frame onto clean, padded surface as
shown. Attach base assembly to front frame with 5
large bolts, 5 spring washers and 5 flat washers as
shown. Secure, but do not over tighten, bolts with a
screwdriver.
B) Attach partition to front frame with 3 small bolts, 3
spring washers and 3 flat washers as shown, using a
screwdriver.
3 A) Attach left and right side panels to front frame
with 6 small bolts, 6 spring washers and 6 flat wash-
ers. Make sure side panels are orientated as shown
during assembly.
B) Secure base assembly to side panels with 4 large
bolts, 4 spring washers and 4 flat washers as shown.
A
A
B
A
B
4 A) Attach top panel to front frame with 5 small bolts,
5 spring washers and 5 flat washers as shown.
B) Secure assembly to top panel with 6 small bolts, 6
spring washers and 6 flat washers as shown.
B
A
B
B
B
A
A