Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Delavan 62" Media Console

COMPONENTS

Made in Vietnam - r08 Page 1 of 4

Thank you for purchasing the Delavan 62” Media Con-

sole. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DELAVAN 62” MEDIA CONSOLE

1 - front frame1 - top panel

1 - base assembly 1 - partition2 - side panels

(1 left, 1 right)

1 - back panel

1 - small adjustable

shelf

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

2 - large

screws

20 - small

bolts

9 - large

bolts

19 - small

screws

29 - spring

washers

29 - flat

washers

6 - pull

bolts

9 - shelf

pins

phillips head screwdriver

(We recommened the use of hand tools instead power tools)

3 - pulls1 - large adjustable

shelf

WALL MOUNTING HARDWARE

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
DELAVAN 62” MEDIA CONSOLE ASSEMBLY HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 2 - large screws 20 - small bolts 9 - large bolts 19 - small screws 29 - spring washers 29 - flat washers 6 - pull bolts 9 - shelf pins WALL MOUNTING HARDWARE Thank you for purchasing the Delavan 62” Media Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
DELAVAN 62” MEDIA CONSOLE A A B B 1 Fit pre-assembled dowels of partition into corresponding holes of base assembly, and attach with 2 large screws as shown. Secure, but do not over tighten, the screws with a phillips head screwdriver. Make sure partition is orientated as shown during assembly. A A 2 A) Place front frame onto clean, padded surface as shown. Attach base assembly to front frame with 5 large bolts, 5 spring washers and 5 flat washers as shown.
PAGE 3
DELAVAN 62” MEDIA CONSOLE 5 With the assistance of another adult, position unit upright as shown. Insert 9 shelf pins at desired shelf heights. Place large and small adjustable shelves into back of assembly as shown. Make sure each shelf is securely supported by shelf pins. 6 With the assistance of another adult, position assembly as shown and attach back panel with 19 small screws. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
DELAVAN 62” MEDIA CONSOLE OPTIONAL WALL MOUNTING ASSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to back of unit using 2 small screws as shown. B) Determine the final location of unit.