Assembly Instruction

Page 3 of 3

DELAVAN

48” MEDIA CONSOLE

Made in Vietnam - r11 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

6 A) With the assistance of another adult, position

unit upright as shown. Insert 8 shelf pins at desired

shelf heights. Place 2 adjustable shelves into

assembly as shown. Make sure each shelf is securely

supported by shelf pins.

B) Attach 1 pull to each door with 2 pull bolts, using

a screwdriver.

Assembly is now complete.

5 With the assistance of another adult, position assem-

bly as shown and attach back panel with 19 small

screws.

For added safety and stability, it is recommended that the wall

mounting hardware be installed. For safe mounting, it is essential to

use wall anchors appropriate to your wall type (i.e. plaster, drywall,

concrete, etc.). Mount to wood studs whenever possible.

A) Attach wall bracket to back of unit using 2 small screws as

shown.

B) Determine the final location of unit. Mark position on the wall,

approximately 2" below the wall bracket mounted to the back of the

unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a

hole in the wall that is slightly smaller in diameter than the anchor.

Gently tap the plastic anchor until the flange of the anchor is flush

with the wall.

D) Attach wall bracket to the wall by inserting 2 large screws, and

into the plastic anchor in the wall.

E) Place the unit so the wall brackets on the back edge are aligned

with the wall brackets on the wall.

F) Lace one end of the wall strap through both brackets, and into

the other end of the strap.

G) Pull the strap tightly until secure.

Repeat steps A-G for remaining wall brackets and wall straps.

Wall mounting assembly is now complete.

NOTE: If you are unsure about your wall type or what mounting

method you should use, consult a qualified professional or your

local hardware store.

OPTIONAL WALL MOUNTING ASSEMBLY

WALL