Assembly Instruction

DELAVAN 48” MEDIA CONSOLE
Made in Vietnam - r11 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Fit pre-assembled dowels of partition into corre-
sponding holes of base assembly, and attach with 2
large screws as shown. Secure, but do not over
tighten, the screws with a phillips head screwdriver.
2 A) Place front frame onto clean, padded surface as
shown. Fit dowels of partition into corresponding holes
of front frame as shown. Make sure partition is orientated
as shown during assembly.
B) Attach base assembly to front frame with 4 large
bolts, 4 spring washers and 4 flat washers as shown.
Secure, but do not over tighten, bolts with a screwdriver.
3 A) Attach left and right side panels to front frame
with 6 small bolts, 6 spring washers and 6 flat wash-
ers. Make sure side panels are oriented as shown
during assembly.
B) Secure base frame to side panels with 4 large bolts,
4 spring washers and 4 flat washers as shown.
A
A
B
A
B
4 A) Attach top panel to front frame with 4 small bolts, 4
spring washers and 4 flat washers as shown.
B) Secure assembly to top panel with 6 small bolts, 6
spring washers and 6 flat washers as shown.
B
A
B
B
B
A