Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Delavan 48" Media Console

COMPONENTS

Made in Vietnam - r11 Page 1 of 3

Thank you for purchasing the Delavan 48” Media Con-

sole. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

DELAVAN 48” MEDIA CONSOLE

1 - front frame1 - top panel

1 - base assembly 1 - partition2 - side panels

(1 left, 1 right)

1 - back panel

2 - adjustable

shelves

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

2 - large

screws

16 - small

bolts

8 - large

bolts

19 - small

screws

24 - spring

washers

24 - flat

washers

4 - pull

bolts

8 - shelf

pins

phillips head screwdriver

(We recommened the use of hand tools instead power tools)

2 - pulls

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.

Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

WALL MOUNTING HARDWARE

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (3 pages)

PAGE 1
DELAVAN 48” MEDIA CONSOLE ASSEMBLY HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 2 - large screws 16 - small bolts 8 - large bolts 19 - small screws 24 - spring washers 24 - flat washers 4 - pull bolts 8 - shelf pins WALL MOUNTING HARDWARE Thank you for purchasing the Delavan 48” Media Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
DELAVAN 48” MEDIA CONSOLE B A 1 Fit pre-assembled dowels of partition into corresponding holes of base assembly, and attach with 2 large screws as shown. Secure, but do not over tighten, the screws with a phillips head screwdriver. A B 2 A) Place front frame onto clean, padded surface as shown. Fit dowels of partition into corresponding holes of front frame as shown. Make sure partition is orientated as shown during assembly.
PAGE 3
DELAVAN 48” MEDIA CONSOLE B A 5 With the assistance of another adult, position assembly as shown and attach back panel with 19 small screws. 6 A) With the assistance of another adult, position unit upright as shown. Insert 8 shelf pins at desired shelf heights. Place 2 adjustable shelves into assembly as shown. Make sure each shelf is securely supported by shelf pins. B) Attach 1 pull to each door with 2 pull bolts, using a screwdriver. Assembly is now complete.