Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Delano High Dining Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 Insert 2 wood dowels and 1 screw post into each leg

as shown. Secure screw post with a flat head

screwdriver. Important: Make sure to align slot on top of

screw post parallel to leg. Do not over tighten screw

posts.

ASSEMBLY

6 - barrel

nuts

6 - screw

posts

6 - set

screws

IMPORTANT:

Make sure to align

slot of screw post

parallel to leg

Made in China - r07 Page 1 of 3

Thank you for purchasing the Delano High Dining

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

DELANO HIGH DINING TABLE

Missing hardware? Please call 800.606.6387 for replacements.

4 - legs

(2 left, 2 right)

12 - wood

dowels

1 - tabletop

12 - bolts

1 - long

crossbar

leg

NOTE: Do not over

tighten the screw post

2 - short

crossbars

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

flat head screwdriver

allen wrench (included)

phillips head screwdriver

Summary of content (3 pages)

PAGE 1
DELANO HIGH DINING TABLE HARDWARE 12 - wood dowels 6 - screw posts 12 - bolts 6 - barrel nuts 6 - set screws Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Delano High Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
DELANO HIGH DINING TABLE NOTE: Align this hole with holes on end of crossbar Align this hole in screw post with hole in top of crossbar A short crossbar B right leg long crossbar left leg 2 A) Insert 2 wood dowels, 1 screw post and 2 barrel nuts into each short crossbar as shown. Use a flat head screwdriver to align the hole on the side of the barrel nut with the holes on the end of the crossbar. B) Insert 2 barrel nuts into long crossbar as shown.
PAGE 3
DELANO HIGH DINING TABLE CORRECTLY ASSEMBLED SIDE VIEW DETAIL 5 Secure all barrel nuts by inserting a set screw into each and tightening each with a phillips head screwdriver as shown. Make sure set screw securely engages each screw post. 6 With the assistance of another adult, place tabletop face down onto a clean, padded surface. Fit legs of assembled unit into corresponding notches in tabletop as shown. Secure, but do not over tighten, each leg with 3 bolts using an allen wrench.