Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
2 A. Insert 4 cam screws into the top panel and secure
with a screwdriver.
B. Insert 2 cam screws into the tall divider and secure
with a screwdriver. Insert 4 dowels into holes in top and
bottom edges as shown.
Arrows on each
cam points towards
nearest edge
A
CUBIX STACKER
Page 2 of 4
Made in China - r04
4 A. Install 4 cams and 8 dowels into the short and
medium dividers as shown.
B. Install 4 cams and 6 dowels into each divider with
slots as shown.
5 Fit together top panel, medium divider, tall divider and
center panel as shown. Make sure labelled edge of tall
divider is oriented as shown.
3 A. Insert 4 cams into the large holes of the tall divider.
Make sure to orient the cams as shown, so that the arrow
points towards the nearest edge.
B. Insert 2 cams into the large holes of the center panel,
making sure that arrows on cams point to nearest edge.
A
B
Center
Panel
B
x 2
1 Short &
1 Medium
Divider
Divider with slot
Tall
Divider
Top
Panel
Tall
Divider
Labelled edge of top panel
faces up