Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Contour Media Stand

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r03 Page 1 of 4

Thank you for purchasing the Contour Media Stand.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

CONTOUR MEDIA STAND

Missing hardware? Please call 800.606.6387

for replacements.

8 - cam

screws

1 - top

panel

1 - bottom

panel

4 - legs

1 - glass

shelf

2 - side panels

(1 left, 1 right)

2 - front panels

(1 left, 1 right)

20 - wood

dowels

4 - adjustable

feet

4 - long

bolts

8 - flat

washers

8 - spring

washers

4 - shelf

pins

18 - wood

screws

4 - short

bolts

2 - brackets

1 - wall

strap

1 - short

screw

1 - long

screw

4 - barrel

nuts

1 - plastic

anchor

8 - cams

1 - back

panel

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

allen wrench (included)

Summary of content (4 pages)

PAGE 1
CONTOUR MEDIA STAND HARDWARE 8 - cam screws 8 - flat washers Thank you for purchasing the Contour Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
CONTOUR MEDIA STAND A side panels Make arrow on each cam points towards nearest edge with holes C bottom panel Make sure hole of each barrel nut is vertical D B front panels top panel 1 A) Insert 2 barrel nuts and 2 cams into left and right side panels as shown. Make sure threaded hole of each barrel nut is vertically aligned with holes of side panel. Make sure arrows on each cam points towards the nearest edge with holes. B) Insert 4 wood dowels and 2 cams into left and right front panels.
PAGE 3
CONTOUR MEDIA STAND 4 Fit dowels of left and right front panels and cam screws of assembled unit as shown. With a screwdriver, turn each cam clockwise until it securely engages each cam screw. B 5 Fit dowels of assembled unit and cam screws of top panel as shown. Secure all cams. A 7 Attach back panel onto assembled unit as shown with 18 wood screws. Secure screws with a screwdriver. 6 A) Insert 4 shelf pins into assembled unit as shown. B) Carefully place glass shelf into assembled unit as shown.
PAGE 4
CONTOUR MEDIA STAND A C short screw anchor long D screw bracket F wall strap 8 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 bracket to top of media stand as shown, using 1 small screw. B) Determine the final location of media stand.