Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
A
B
Made in China - r06 Page 5 of 8
ASSEMBLY INSTRUCTIONS FOR
THE CONTOUR AUDIO SHELVING
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
CONTOUR AUDIO TOWER
Missing hardware? Please call 800.606.6387 for replacements.
8 - cam
screws
2 - side panels
(1 left, 1 right)
2 - shelves
1 - top
panel
12 - wood
dowels
4 - long
bolts
4 - flat
washers
4 - spring
washers
4 - short
bolts
8 - cams
8 - screws
9 A) Insert 4 cams and 4 wood dowels into shelves
as shown. Make sure arrow on each cam points
towards the nearest edge with holes.
B) Insert 4 cam screws and 2 wood dowels into left
and right side panels as shown. Secure cam screws,
but do not over tighten with a phillips head screw-
driver.
2 - connecting
pieces
shelves
side
panels
Make sure arrow on
each cam points
towards nearest
edge with holes
2 - metal
plates
phillips head screwdriver
Customer Service 800.967.6696 | www.crateandbarrel.com
allen wrench (included)
2 - brackets
1 - wall
strap
1 - short
screw
1 - long
screw
1 - plastic
anchor