Assembly Instruction

A
B
A
B
C
B
A
CONTOUR AUDIO TOWER
Made in China - r06 Page 3 of 8
4 Fit dowels of assembled unit and cam screws of
top panel as shown. With a screwdriver, turn each
cam clockwise until it securely engages each cam
screw.
5 A) Attach 2 door hinges to each door as shown
with 2 hinge screws per hinge. Secure screws with a
screwdriver.
B) Attach 1 pull onto each door as shown with 2 pull
screws per pull. Secure screws with a screwdriver.
6 A) Attach hinges of left and right door to assembled
unit as shown. With a screwdriver, turn each pre-
assembled screw clockwise to secure. If needed, adjust
doors by slightly loosening or tightening the screw.
B) Insert 4 shelf pins to assembled unit as shown.
C) Carefully place shelf to assembled unit as shown.
Make sure shelf is securely supported onto each shelf pin.
7 Attach back panel onto assembled unit as shown
with 14 wood screws. Secure screws with a
screwdriver.
Customer Service 800.967.6696 | www.crateandbarrel.com