CONTOUR AUDIO TOWER HARDWARE 4 - cam screws Missing hardware? Please call 800.606.6387 for replacements. 12 - wood dowels 4 - adjustable 8 - flat washers feet ASSEMBLY INSTRUCTIONS FOR THE CONTOUR AUDIO BASE This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
CONTOUR AUDIO TOWER A side panels B Make sure arrow on each cam points towards nearest edge with holes top panel Make sure hole of each barrel nut is vertical 1 A) Insert 2 barrel nuts, 2 cams, and 4 wood dowels into left and right side panels as shown. Make sure threaded hole of each barrel nut is vertically aligned with holes of side panel. Make sure arrows on each cam points towards the nearest edge with holes. B) Insert 4 cam screws into top panel as shown.
CONTOUR AUDIO TOWER A B 4 Fit dowels of assembled unit and cam screws of top panel as shown. With a screwdriver, turn each cam clockwise until it securely engages each cam screw. A 5 A) Attach 2 door hinges to each door as shown with 2 hinge screws per hinge. Secure screws with a screwdriver. B) Attach 1 pull onto each door as shown with 2 pull screws per pull. Secure screws with a screwdriver. B A B C 6 A) Attach hinges of left and right door to assembled unit as shown.
CONTOUR AUDIO TOWER A C short screw anchor long D screw bracket F wall strap 8 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 bracket to top of audio base unit as shown, using 1 small screw. B) Determine the final location of audio base unit.
CONTOUR AUDIO TOWER HARDWARE ASSEMBLY INSTRUCTIONS FOR THE CONTOUR AUDIO SHELVING This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
CONTOUR AUDIO TOWER 10 Fit cam screws of side panels and dowels of shelves as shown. Turn each cam clockwise until it securely engages each cam screw, using a phillips head screwdriver. 11 Fit holes of top panel and dowels of assembled unit as shown. Secure top panel with 4 large bolts, 4 spring washers, and 4 flat washers as shown, using an allen wrench. shelving CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
CONTOUR AUDIO TOWER A C short screw anchor long D screw bracket F wall strap 13 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 bracket to top of audio shelving unit as shown, using 1 small screw.
CONTOUR AUDIO TOWER 14 If you purchased the complete Contour collection (media stand, hutch, and audio tower), please proceed with the following instructions. Attach 4 metal plates onto assembled unit as shown. Secure plates with 2 short bolts as shown, using an allen wrench. Audio tower assembly is now complete. Made in China - r06 Customer Service 800.967.6696 | www.crateandbarrel.
CONTOUR HUTCH HARDWARE 4 - cam screws Thank you for purchasing the Contour Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
CONTOUR HUTCH 2 Fit cam screws of side panels and dowels of shelf together as shown. Turn each cam clockwise until it securely engages each cam screw, using a phillips head screwdriver. 3 Fit dowels of assembled unit as shown into corresponding holes in top panel. Secure top panel with 4 large bolts, 4 spring washers, and 4 flat washers as shown, using the allen wrench. hutch media stand 4 With the assistance of another adult, carefully place assembled unit face down as shown.
CONTOUR HUTCH A C short screw anchor long D screw bracket F wall strap 6 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 bracket to top of hutch as shown, using 1 small screw. B) Determine the final location of hutch.
CONTOUR HUTCH 7 If you purchased the complete Contour collection (media stand, hutch, audio stand, and audio tower), please proceed with the following instructions. Attach 4 metal plates onto assembled unit as shown. Secure plates with 2 short bolts as shown, using an allen wrench. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
CONTOUR MEDIA STAND HARDWARE 8 - cam screws 8 - flat washers Thank you for purchasing the Contour Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
CONTOUR MEDIA STAND A side panels Make arrow on each cam points towards nearest edge with holes C bottom panel Make sure hole of each barrel nut is vertical D B front panels top panel 1 A) Insert 2 barrel nuts and 2 cams into left and right side panels as shown. Make sure threaded hole of each barrel nut is vertically aligned with holes of side panel. Make sure arrows on each cam points towards the nearest edge with holes. B) Insert 4 wood dowels and 2 cams into left and right front panels.
CONTOUR MEDIA STAND 4 Fit dowels of left and right front panels and cam screws of assembled unit as shown. With a screwdriver, turn each cam clockwise until it securely engages each cam screw. B 5 Fit dowels of assembled unit and cam screws of top panel as shown. Secure all cams. A 7 Attach back panel onto assembled unit as shown with 18 wood screws. Secure screws with a screwdriver. 6 A) Insert 4 shelf pins into assembled unit as shown. B) Carefully place glass shelf into assembled unit as shown.
CONTOUR MEDIA STAND A C short screw anchor long D screw bracket F wall strap 8 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 bracket to top of media stand as shown, using 1 small screw. B) Determine the final location of media stand.
