Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
4 A. With the assistance of another adult, lift assembled
unit into an upright position. Place wood top into
position. Insert 6 wood screws and 6 washers through
each metal tab on the crossbars and secure with a
phillips head screwdriver.
B. Fully tighten 8 machine screws installed in Steps 1-2
with the allen wrench. Assembly is now complete.
2 Attach remaining leg frame to assembly with 2
machine screws per crossbar, using the same method
outlined in Step 1.
3 Insert 1 plastic tube cap onto bottom of each leg. If
necessary, gently tap into place with a hammer.
CARE & CLEANING
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
CONRAD CONSOLE
Page 2 of 2
Made in China - r03
A
B
x 8