Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

Thank you for purchasing the Conrad Console. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

TOOLS REQUIRED

Allen wrench (included)

Phillips head screwdriver

CONRAD CONSOLE

Page 1 of 2

Made in China - r03

Missing hardware? Please call

800.606.6387 for replacements.

8 - machine screws

6 - wood screws

6 - flat washers

4 - tube caps

1 - wood top

2 - top crossbars

2 - leg frames

1 Lay 1 leg frame face down with the tube fittings

facing up, oriented as shown. Slide 2 crossbars over tube

fittings as shown. Make sure holes in crossbars and tube

fittings are aligned and face down.

Loosely attach with 2 machine screws per crossbar. Do not

fully tighten the screws.

x 2

PAGE 1
CONRAD CONSOLE HARDWARE 6 - wood screws 8 - machine screws 6 - flat washers 4 - tube caps Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Conrad Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
CONRAD CONSOLE 2 Attach remaining leg frame to assembly with 2 machine screws per crossbar, using the same method outlined in Step 1. 3 Insert 1 plastic tube cap onto bottom of each leg. If necessary, gently tap into place with a hammer. A CARE & CLEANING B x8 Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 4 A.