Assembly Instruction

Page 4 of 4
COLFAX
MEDIA STAND
Made in China - r04 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
11 A) Fit top of door front into corresponding groove
on underside of the top panel as shown.
B) Fit bottom of door front into corresponding groove of
bottom panel.
Assembly is now complete.
door front
A
B
A
B
A
large shelf
small shelf
shelf pin
10 A) Insert 8 shelf pins at desired shelf heights as
shown. Turn shelf pins clockwise to secure.
B) Place 1 small shelf and 1 large shelf onto shelf pins
as shown. Make sure shelves are securely supported by
each shelf pin.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is finished
with a protective clear lacquer.
SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert wall screw (not included) through end of wall strap and
into wall as shown.
B. Insert wall screw (included) through end wall strap and into the
top back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
wall
screw
wall
strap
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
WALL
NOTE: Insert screws 3/4"-1"
from the edge of the strap