Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Colfax 54" Media Console

COMPONENTS

Made in China - r04 Page 1 of 4

Thank you for purchasing the Colfax Media Stand. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COLFAX MEDIA STAND

1 - door front

1 - top panel

1 - large shelf

1 - back panel

1 - bottom panel

1 - partition

HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

6 - bolts 18 - cam

screws

20 - wood

dowels

18 - cams

18 - cam

covers

8 - shelf

pins

(We recommend the use of hand tools instead power tools)

1 - small shelf

2 - side panels

(1 left, 1 right)

phillips head screwdriverallen wrench (included)

1 A) Insert 8 wood dowels and 10 cam screws into top

panel as shown. Secure, but do not over tighten, cam

screws using a phillips head screwdriver.

B) Insert 8 wood dowels and 4 cam screws into bottom

panel as shown.

bottom

panel

NOTE: Do not over

tighten the cam screws

top

panel

WALL MOUNTING HARDWARE

1 - wall

strap

1 - wall

screw

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
COLFAX MEDIA STAND HARDWARE 6 - bolts 8 - shelf pins 18 - cam screws 20 - wood dowels 18 - cams Missing hardware? Please call 800.606.6387 for replacements. 18 - cam covers WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Colfax Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
COLFAX MEDIA STAND NOTE: Make sure arrows on each cam point toward nearest edge with holes A partition right side panel A B left side panel B 2 A) Insert 3 cams into right side panel as shown. Make sure arrows on each cam point toward nearest edge with holes. B) Insert 2 wood dowels, 2 cam screws and 3 cams into left side panel as shown. back panel 3 A) Insert 6 cams into partition as shown. B) Insert 2 wood dowels, 2 cam screws and 6 cams into back panel as shown.
PAGE 3
COLFAX MEDIA STAND right side panel bottom panel 6 Fit dowels of bottom panel into corresponding holes of assembled unit as shown. Secure all cams. 7 With the assistance of another adult, position unit as shown. Fit dowels of bottom panel into corresponding holes of right side panel as shown. NOTE: Do not over tighten the bolts right side panel top panel bottom panel left side panel 8 Secure bottom panel to left and right side panels with 3 bolts per side as shown, using a screwdriver.
PAGE 4
COLFAX MEDIA STAND A shelf pin A A large shelf B B small shelf 10 A) Insert 8 shelf pins at desired shelf heights as shown. Turn shelf pins clockwise to secure. B) Place 1 small shelf and 1 large shelf onto shelf pins as shown. Make sure shelves are securely supported by each shelf pin. door front 11 A) Fit top of door front into corresponding groove on underside of the top panel as shown. B) Fit bottom of door front into corresponding groove of bottom panel. Assembly is now complete.