Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Cole Six-Drawer Dresser

HARDWARE

TOOLS REQUIRED

COMPONENTS

BOX 1

COMPONENTS

BOX 2

Made in China - r05 Page 1 of 5

Thank you for purchasing the Cole Six Drawer Dresser.

This page lists all the contents included in the boxes.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COLE SIX DRAWER DRESSER

Missing hardware? Please call 800.606.6387 for replacements.

2 - side panels

(1 left, 1 right)

1 - top

panel

1 - bottom

panel

1 - back

panel

12 - drawer sides

(6 left, 6 right)

6 - drawer backs

6 - drawer fronts

6 - drawer bottoms

4 - legs

29 - wood

dowels

23 - cam

screws

23 - cams

24 - medium

screws

4 - leg

plates

23 - cam

covers

12 - small

screws

9 - large

screws

1 - partition

1 - center

support

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

allen wrench (included)

Summary of content (5 pages)

PAGE 1
COLE SIX DRAWER DRESSER HARDWARE Thank you for purchasing the Cole Six Drawer Dresser. This page lists all the contents included in the boxes. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
COLE SIX DRAWER DRESSER NOTE: Make sure arrows on each cam points toward nearest edge with holes A side panel left side panel B right side panel back panel back panel 1 A) Insert 4 wood dowels, 3 cam screws, and 2 cams into left and right side panels as shown. Secure cam screws with a phillips head screwdriver. Make sure arrows on each cam points toward nearest edge with holes. B) Insert 14 cams, 3 cam screws and 14 wood dowels into back panel as shown.
PAGE 3
COLE SIX DRAWER DRESSER top panel top panel 5 Insert 10 cam screws into top panel as shown. 6 With the assistance of another adult, position assembly as shown. Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure 10 cams. B A bottom panel bottom panel 7 Insert 4 cam screws into bottom panel as shown. Made in China - r05 8 A) Fit dowels of assembled unit into corresponding holes of bottom panel as shown. Secure 4 cams.
PAGE 4
COLE SIX DRAWER DRESSER center B support leg A assembly leg plate C cam covers leg 9 Attach leg plate to leg with 3 medium screws per leg as shown. Secure screws with a screwdriver. drawer front 10 A) Attach 4 leg assemblies onto bottom of assembled unit with 3 medium screws per leg assembly as shown. Secure, but do not overtighten screws with a screwdriver. B) Attach center support onto bottom of assembled unit. Turn center support clockwise to secure as shown.
PAGE 5
COLE SIX DRAWER DRESSER drawer back drawer assembly 13 Slide drawer back into corresponding grooves of drawer assembly as shown. A 14 Place drawer assembly upside down onto a clean, padded surface as shown. Secure drawer bottom of drawer assembly with 2 small screws as shown, using a screwdriver. Repeat steps 11-14 for remaining 5 drawer assemblies. CLEANING AND CARE drawer assembly Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.