Assembly Instruction

COLE FOUR DRAWER CHEST
Made in China - r06 Page 3 of 5
6 A) Fit dowels of assembled unit into corresponding holes of
bottom panel as shown. Secure 2 cams.
B) Secure bottom panel with 6 large screws as shown, using a
screwdriver.
C) At this point, cover all exposed cams with cam covers.
leg
plate
leg
A
B
C
Customer Service 800.967.6696 | www.crateandbarrel.com
8 Attach 4 leg assemblies onto bottom of assembled
unit with 3 medium screws per leg assembly as shown.
Secure, but do not overtighten screws with a screwdriver.
bottom
panel
5 Insert 2 cam screws into bottom panel as shown.
leg
assembly
bottom
panel
7 Attach leg plate to leg with 3 medium screws per
leg as shown. Secure screws with a screwdriver.