Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Cole Four-Drawer Chest

HARDWARE

TOOLS REQUIRED

COMPONENTS

BOX 1

COMPONENTS

BOX 2

Made in China - r06 Page 1 of 5

Thank you for purchasing the Cole Four Drawer Chest.

This page lists all the contents included in the boxes.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COLE FOUR DRAWER CHEST

Missing hardware? Please call 800.606.6387 for replacements.

2 - side panels

(1 left, 1 right)

1 - top panel

1 - bottom panel

1 - back panel

8 - drawer sides

(4 left, 4 right)

4 - drawer backs

4 - drawer fronts

4 - drawer bottoms

4 - legs

18 - wood

dowels

14 - cam

screws

14 - cams

24 - medium

screws

4 - leg

plates

14 - cam

covers

12 - small

screws

6 - large

screws

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
COLE FOUR DRAWER CHEST HARDWARE Thank you for purchasing the Cole Four Drawer Chest. This page lists all the contents included in the boxes. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
COLE FOUR DRAWER CHEST A side panel NOTE: Make sure arrows on each cam point towards nearest edge with holes right side panel B back panel left side panel back panel 1 A) Insert 4 wood dowels, 3 cam screws, and 2 cams into left and right side panel as shown. Secure cam screws with a phillips head screwdriver. Make sure arrows on each cam points toward nearest edge with holes. B) Insert 10 cams and 10 wood dowels into back panel as shown.
PAGE 3
COLE FOUR DRAWER CHEST bottom panel B A bottom panel C 5 Insert 2 cam screws into bottom panel as shown. 6 A) Fit dowels of assembled unit into corresponding holes of bottom panel as shown. Secure 2 cams. B) Secure bottom panel with 6 large screws as shown, using a screwdriver. C) At this point, cover all exposed cams with cam covers. leg assembly leg plate leg 7 Attach leg plate to leg with 3 medium screws per leg as shown. Secure screws with a screwdriver.
PAGE 4
COLE FOUR DRAWER CHEST drawer front Make sure groove on the drawer front is aligned with groove on the side panels right drawer side left drawer side drawer bottom 9 Slide left and right drawer sides into corresponding grooves of drawer front as shown. 10 Slide drawer bottom into corresponding grooves of drawer assembly as shown. drawer back drawer assembly 11 Slide drawer back into corresponding grooves of drawer assembly as shown.
PAGE 5
COLE FOUR DRAWER CHEST drawer assembly 13 With the assistance of another adult, position unit upright as shown. Fit drawer glide wheels over wheels on the cabinet glides and push in while lifting slightly. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in China - r06 Customer Service 800.967.6696 | www.crateandbarrel.