Assembly Instruction

CHROME 4 SHELF UNIT

Made in Taiwan - r02 Page 3 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

For added safety and stability, it is recommended that

the wall mounting hardware be installed. For safe

mounting, it is essential to use wall anchors

appropriate to your wall type (i.e. plaster, drywall,

concrete, etc.). Mount to wood studs whenever

possible.

A) Attach 2 mounting brackets to back of unit by

fitting hook of mounting bracket onto upright of unit

as shown.

B) Determine the final location of unit. Mark position

on the wall.

C) Drill 2 holes in the wall stud. If the wall stud is not

available, drill 2 holes in the wall that are slightly

smaller in diameter than the anchor. Insert 2 plastic

anchors and insert into pre-drilled holes. If necessary,

gently tap the plastic anchor until the flange of the

anchor is flush with the wall.

D) Attach wall brackets to the wall by inserting 1

large screw through each bracket and into each

plastic anchor in the wall. Secure each screw with a

phillips head screwdriver.

Wall mounting assembly is now complete.

SAFETY MOUNTING INSTRUCTIONS:

NOTE:

If you are unsure about your wall type or what

mounting method you should use, consult a

qualified professional or your local hardware

store.

plastic

anchor

mounting

screw

mounting

bracket

WALL