Assembly Instruction

CHROME 4 DRAWER CART
Made in Taiwan - r04 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: Do not over
tighten the bolts
top panel
A
2 A) Attach 8 drawer glides to assembled
unit by fitting brackets of drawer glide into
uprights of side frame as shown. Make sure
drawer glides face in as shown.
B) Attach 2 long crossbars to assembled
unit with 2 brackets and 2 large bolts per
crossbar as shown. Secure, but do not over
tighten, bolts using a allen wrench.
C) Secure long crossbars with 1 small bolt
and 1 hex nut by turning allen wrench
clockwise and hex wrench counter clock-
wise.
bracket
B
glide
upright
bracket
long
crossbar
C
A
B
C
3 A) Fit top drawer into corresponding grooves
of drawer glides. Fit 4 pins into corresponding
holes of assembled unit as shown
B) Attach top panel to assembled unit by fitting
brackets of top panel into uprights of each side
frame as shown
C) Fit all remaining drawers into corresponding
grooves of drawer glides. Fit remaining pins into
corresponding holes of assembled unit as shown.
Assembly is now complete.
top drawer
B
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
A
A