Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Chrome Four-Drawer Cart

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Taiwan - r05 Page 1 of 2

Thank you for purchasing the Chrome 4 Drawer Cart.

This page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this product.

CHROME 4 DRAWER CART

Missing hardware?

Please call 800.606.6387 for replacements.

allen wrench

(included)

2 - side frames

2 - long

crossbars

4 - drawers

hex wrench

(included)

8 - drawer

glides

2 - short

crossbars

1 - top panel

2 - wheels

2 - locking

wheels

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

8 - large

bolts

16- pins

8 - brackets 1 - hex

nut

1 - small

bolt

1 A) Attach 2 short crossbars to side frames with 2

brackets and 2 large bolts per side as shown. Secure, but

do not over tighten, bolts using an allen wrench.

B) Attach 2 wheels and 2 locking wheels to assembled unit

as shown. Secure, but do not over tighten, wheels using a

hex wrench.

locking wheel

side frame

bracket

short

crossbar

left wheel

locking wheel

left wheel

short

crossbar

NOTE: Do not over

tighten the bolts

Summary of content (2 pages)

PAGE 1
CHROME 4 DRAWER CART HARDWARE 8 - brackets 1 - hex nut 1 - small bolt 8 - large bolts 16- pins Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Chrome 4 Drawer Cart. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
CHROME 4 DRAWER CART NOTE: Do not over tighten the bolts A bracket B glide 2 A) Attach 8 drawer glides to assembled unit by fitting brackets of drawer glide into uprights of side frame as shown. Make sure drawer glides face in as shown. B) Attach 2 long crossbars to assembled unit with 2 brackets and 2 large bolts per crossbar as shown. Secure, but do not over tighten, bolts using a allen wrench.