Assembly Instruction

Made in Taiwan - r02 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

4 A) Attach 2 crossbars to assembled unit with 2

brackets and 2 large bolts per crossbar as shown.

Secure, but do not over tighten, bolts using a allen

wrench.

B) Secure crossbars with 1 small bolt and 1 hex nut.

Secure, but do not over tighten, bolt by turning allen

wrench counter clockwise and hex wrench clockwise.

Assembly is now complete.

3 With the assistance of another adult, attach remaining 4

shelves to side frames by fitting bracket of each shelf

into corresponding uprights of side frames as shown.

bracket

large

bolt

crossbar

NOTE: Do not over

tighten bolts

shelf

crossbar

shelf

bracket

upright

5-SHELF UNIT CHROME WITH WOOD

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.

Do not use abrasive cleaners.

2 With the assistance of another adult, fit brackets of shelf

between uprights of each side frame as shown. Press

down on shelf firmly until it is securely supported by the

corresponding side rail below.

shelf

side frame

bracket

side frame

shelf