Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
CARSON BUFFET
Made in China 2004
Page 2 of 5
1 Attach the 2 side panels to the back panel using 6 long
machine screws, 6 spring washers and 6 small flat washers.
Securely tighten all screws.
2 Fit the shelf into the assembly, making sure the
larger notch faces the back.
3 Fit the bottom panel into the assembly, making sure the
larger notch faces the back.
x 6
4 Attach the 2 support panels to the shelf using 4 long
wood screws.
Securely tighten all screws.
Make sure the wood
glides on the support
panels face inside
Make sure the large
notch & groove
on the bottom panel
face the back
Slat on the edge of
the support
panels face up
Large notch
faces the back