Assembly Instruction

Made in China - r03 Page 2 of 2
CALAIS ROUND COFFEE TABLE
2 Align holes in center connector with holes in legs. Loosely
attach center connector to each leg as illustrated. At this point,
fully tighten all the bolts installed in steps 1-2 with the hex
wrenches provided. Cover all bolts with bolt caps.
VIEW FROM
BELOW
cap
washer
short bolt
3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole
in the tabletop with the center hole cap.
Assembly is now complete.
center hole cap
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Customer Service 800.967.6696 | www.crateandbarrel.com