Assembly Instruction

Made in China - r04 Page 2 of 4
BUNGALOW SIDEBOARD
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
3 Fit dowels of side panels and partition into corresponding
holes of bottom panel as shown. Make sure back grooves of
side panels and partition are positioned towards the back,
while the sliding door grooves on bottom panel are positioned
towards the front. Using an allen wrench, secure bottom
panel with 6 medium bolts, 1 spring washer and 1 flat
washer as shown.
4 With the assistance of another adult, position unit
upright as shown. Fit 2 back panels into corresponding
back grooves of side panels and partition as shown.
1 A) Insert 4 wood dowels into partition as shown.
B) Insert 4 wood dowels into left and right side
panels as shown.
2 Attach support leg to bottom panel with 1 small bolt,
1 spring washer and 1 flat washer as shown. Secure,
but do not over tighten, bolts with an allen wrench.
A
B
medium
bolt
NOTE: Do not over
tighten the bolts
sliding door grooves
at front