Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Bungalow Extension Dining Table

BUNGALOW EXTENSION DINING TABLE

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04

Page 1 of 3

8 - bolts 6 - barrel

screws

6 - barrel

1 - tabletop

assembly

4 - legs

(2 leg A, 2 leg B)

Missing hardware?

Please call 800.606.6387 for replacements.

2 - short

crossbars

Thank you for purchasing the Bungalow Extension

Dining table. This page lists all the contents included

in the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this

product.

8 - spring

washers

phillips head screwdriver

flat head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

6 - wood

dowels

8 - flat

washers

Customer Service 800.967.6696 | Latest instructions aavilable at www.crateandbarrel.com

1 Insert 1 barrel screw and 1 wood dowel into each

leg as shown. Secure, but do not over tighten, barrel

screws with a phillips head screwdriver.

leg

NOTE: Do not over

tighten the cam screws

1 - long

crossbar

1 - leaf

Summary of content (3 pages)

PAGE 1
BUNGALOW EXTENSION DINING TABLE HARDWARE 6 - wood dowels 8 - bolts 8 - flat washers 6 - barrel screws 6 - barrel 8 - spring washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Bungalow Extension Dining table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
BUNGALOW EXTENSION DINING TABLE leg B short crossbar long crossbar B A short crossbar NOTE: Make sure holes of each barrel nut aligns with nearest edge with holes 2 A) Using a screwdriver, remove set screws from barrel nuts and set aside until further instructions. Insert 2 barrel nuts into long and short crossbars as shown. With a flat head screwdriver, make sure holes of each barrel nut aligns with nearest hole on edge. B) Insert 1 barrel screw and 1 wood dowel into short crossbars as shown.
PAGE 3
BUNGALOW EXTENSION DINING TABLE EXTENSION LEAF INSTALLATION Locate the 2 metal clasps on the underside of the tabletop. Unlock each clasp by turning on the lever. With the assistance of another adult, pull 2 tabletop sections apart. Place leaf into position, aligning pins on leaf with matching locator holes. Push both tabletops towards the center. Re-latch clasps on underside of tabletop to the leaf. Installation of the leaf is now complete. CLEANING & CARE Clean surfaces with a dry or damp soft cloth.