Assembly Instruction

Made in China - r02 Page 2 of 2

2 A) Insert 5 wheels into base as shown. Turn each

wheel clockwise to secure.

B) Insert gas lift into base assembly as shown. Press

firmly to secure

BUNGALOW DESK CHAIR

3 Fit top of gas lift into corresponding hole on the bottom

of the seat assembly as shown.

NOTE: Finalize assembly by sitting heavily on the chair a

few times. This wil secure all the component

connections.

gas lift

base

VIEW FROM BELOW

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do

not use abrasive cleaners. Do not use furniture

wax or polish as the unit is finished with a protec-

tive clear lacquer. It is recommended to use

coasters to protect surface from heat and water.

OPERATING

INSTRUCTIONS

1 HEIGHT ADJUSTMENT:

while sitting in the chair, pull the lever

up to lower the seat. To raise the seat,

take your weight off the chair and pull the lever up.

2 LOCKING THE SEAT:

While sitting in the chair, lean your weight forward and

push the lever in.

3 UNLOCKING THE SEAT:

While sitting in the chair, lean you weight forward and

pull the lever out.

4 ADJUSTING THE TENSION:

Tighten the knob to increase the back tension (less

rocking). Loosen the knob to decrease the back

tensions (more rocking).

wheels