Assembly Instruction

Made in China - r11 Page 2 of 4
1 Place top panel onto clean, padded surface as
shown. Attach left and right side panels to
assembled unit with 2 medium bolts, 2 spring
washers and 2 flat washers per side panel using an
allen wrench.
BUNGALOW MEDIA STAND
2 Attach front frame to top panel of assembled unit
with 4 medium bolts, 4 spring washers and 4 flat
washers. Secure, but do not over tighten, bolts with an
allen wrench.
3 Attach partition to assembled unit with 2 medium
bolts, 2 spring washers and 2 flat washers.
left side
panel
right side
panel
top panel
front
frame
partition
back panel
4 Slide back panel into corresponding grooves of side
panels as shown. Secure back panel with 2 small screws as
shown, using screwdriver.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: Do not over tighten bolts.
medium bolt
spring washer
flat washer
medium bolt
spring washer
flat washer