Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 A) Insert 4 cams into base panel as shown. Make sure

arrows on each cam points toward nearest edge with

holes.

B) Insert 2 cams and 4 cam screws into left and right

side panel. Secure, but do not over tighten the cam

screws with a phillips head screwdriver.

ASSEMBLY

Made in Vietnam - r03 Page 1 of 3

Thank you for purchasing the Brighton Storage

Drawer. This page lists the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

BRIGHTON STORAGE DRAWER

Missing hardware? Please call 800.606.6387 for replacements.

1 - back panel

12 - cams

1 - base panel

2 - side panels

(1 right, 1 left)

12 - cam

screws

1 - front panel

NOTE: Make sure

arrows on each

cam points toward

nearest edge with

holes

4 - wheels16 - screws

base

panel

left and right

side panels

NOTE: Do not over

tigthen the cam

screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

PAGE 1
BRIGHTON STORAGE DRAWER HARDWARE 12 - cam screws 16 - screws 12 - cams 4 - wheels Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Brighton Storage Drawer. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BRIGHTON STORAGE DRAWER right side panel back panel base panel 2 A) Insert 4 cams into back panel as shown. 3 Fit dowels of base panel into corresponding holes of right side panel. With a screwdriver, turn each cam counter clockwise until it securely engages each cam screw. back panel left side panel 4 Fit dowels of back panel into corresponding holes of the assembled drawer unit. Secure all cams.
PAGE 3
BRIGHTON STORAGE DRAWER NOTE: Do not over tigthen the cam screws front panel 6 Fit dowels of assembled drawer unit into corresponding holes of front panel. Secure all cams. Brighton twin bed (sold separately) 7 With the assistance of another adult, carefully place drawer assembly upside down onto a clean, padded surface. Attach 4 wheels to drawer assembly with 4 screws per wheel as shown. Secure, but do not over tighten screws using a screwdriver.