Assembly Instruction

Made in Vietnam - r04 Page 3 of 3
BRIGHTON STORAGE BENCH
7 Insert top edge of right door into top groove of
unit as shown. At this point, align bottom edge of door
into bottom groove of unit. Fit door into place. Repeat
steps for left door.
Assembly is now complete.
6 A) Insert 12 shelf supports at desired shelf heights as
shown.
B) Place 1 adjustable shelf and 2 adjustable notched
shelves into assembled unit. Make sure each shelf is
securely supported by each shelf support.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
adjustable
shelf
adjustable
notched shelf
shelf
support
A
B
left
door
right
door
A
5 With the assistance of another adult, carefully position unit
upright. Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure top panel with 14 bolts,
14 spring washers and 14 flat washers.
top
panel