Assembly Instruction

Made in Vietnam - r04 Page 2 of 3
BRIGHTON STORAGE BENCH
4 Fit dowels of assembled unit into corresponding holes
of front frame as shown. Secure front frame with 2 bolts,
2 spring washers, and 2 flat washers per side panel.
1 Fit dowels of left and right partitions into corresponding
holes of bottom panel as shown. When assembling
partitions, make sure the ledges face outwards and notched
corners are on the same side. Secure bottom panel with 4
bolts, 4 spring washers and 4 flat washers, using a phillips
head screwdriver. Do not over tighten the bolts.
3 With the assistance of another adult, fit dowels of
assembled unit into corresponding holes of back frame as
shown. Secure assembly with 2 bolts, 2 spring washers,
and 2 flat washers per side panel.
2 Fit left and right side panels onto bottom panel of
assembled unit as shown. Secure side panels with 4
bolts, 4 spring washers and 4 flat washers as shown.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
left
partition
right
partition
NOTE: Make sure
notched corner of
each partition are
assembled on the
same side
NOTE: Make
sure ledge of
each partition
faces outward
bottom
panel
NOTE: Do not
over tighten
the bolts
side
panel
back
frame
back
frame
front
frame
front
frame
right side
panel
left side
panel
bottom
panel