Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r04 Page 1 of 3

Thank you for purchasing the Brighton Storage

Bench. This page lists the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

BRIGHTON STORAGE BENCH

Missing hardware?

Please call 800.606.6387 for replacements.

1 - front

frame

1 - bottom

panel

1 - top

panel

2 - side panels

(1 left, 1 right)

1 - adjustable

shelf

30 - bolts

30 - spring

washers

30 - flat

washers

1 - back

panel

2 - doors

(1 left, 1 right)

2 - partitions

2 - adjustable

notched shelves

12 - shelf

supports

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

PAGE 1
BRIGHTON STORAGE BENCH HARDWARE 30 - bolts 30 - spring washers 30 - flat washers 12 - shelf supports Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Brighton Storage Bench. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BRIGHTON STORAGE BENCH NOTE: Make sure notched corner of each partition are assembled on the same side NOTE: Do not over tighten the bolts left partition bottom panel right partition right side panel bottom panel NOTE: Make sure ledge of each partition faces outward 1 Fit dowels of left and right partitions into corresponding holes of bottom panel as shown. When assembling partitions, make sure the ledges face outwards and notched corners are on the same side.
PAGE 3
BRIGHTON STORAGE BENCH top panel shelf A support A adjustable shelf adjustable notched shelf 5 With the assistance of another adult, carefully position unit upright. Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure top panel with 14 bolts, 14 spring washers and 14 flat washers. right door left door B 6 A) Insert 12 shelf supports at desired shelf heights as shown. B) Place 1 adjustable shelf and 2 adjustable notched shelves into assembled unit.