Assembly Instruction

Made in Vietnam - r05 Page 2 of 3
1 A) Attach support leg to partition. Turn leg clockwise to
secure.
B) Fit dowels of partition and left/right side panels into
corresponding holes of back panel as shown. Secure side
panels with 3 bolts, 3 spring washers, and 3 flat washers per
side panel, using a phillips head screwdriver.
BRIGHTON SIX DRAWER DRESSER
3 With the assistance of another adult, position unit upright.
Fit dowels of assembled unit into corresponding holes of top
panel, and secure with 14 bolts, 14 spring washers, and 14
flat washers as shown.
top
panel
4 A) Fit pre-attached dowels of large drawer front into
corresponding holes of large drawer left side as shown.
Secure drawer front with 2 screws, using a phillips head
screwdriver. Do not over tighten the screws.
B) Attach large drawer back with 2 screws as shown.
2 Fit dowels of assembled unit into corresponding holes of
front frame, and fasten with 3 bolts, 3 spring washers, and
3 flat washers per side panel as shown.
A
B
B
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
front
frame
left side
panel
right side
panel
back
panel
NOTE: Do not
over tighten
the bolts
partition
support
leg
large drawer
front
large drawer
left side
large drawer
back
A
B
NOTE: Do not
over tighten
the screws