Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Brighton Six-Drawer Dresser

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r05 Page 1 of 3

Thank you for purchasing the Brighton Six Drawer

Dresser. This page lists the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

BRIGHTON SIX DRAWER DRESSER

Missing hardware? Please call 800.606.6387 for replacements.

2 - side panels

(1 left, 1 right)

2 - small

drawer

fronts

4 - small

drawer

sides

(2 left, 2 right)

6 - drawer

bottoms

2 - small

drawer back

48 - medium

screws

26 - bolts

1 - front

frame

1 - back

panel

1 - top

panel

1 - partition

26 - flat

washers

26 - spring

washers

4 - large

drawer

fronts

4 - large

drawer back

8 - large

drawer

sides

(4 left, 4 right)

1 - support leg

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

Summary of content (3 pages)

PAGE 1
BRIGHTON SIX DRAWER DRESSER ASSEMBLY HARDWARE 26 - bolts 26 - flat washers 26 - spring washers 48 - medium screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Brighton Six Drawer Dresser. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BRIGHTON SIX DRAWER DRESSER A left side panel support leg partition right side panel front frame B back panel B NOTE: Do not over tighten the bolts 1 A) Attach support leg to partition. Turn leg clockwise to secure. B) Fit dowels of partition and left/right side panels into corresponding holes of back panel as shown. Secure side panels with 3 bolts, 3 spring washers, and 3 flat washers per side panel, using a phillips head screwdriver.
PAGE 3
BRIGHTON SIX DRAWER DRESSER large drawer right side drawer bottom 5 Slide drawer bottom into corresponding grooves of drawer front and back as shown. 6 Fit dowels of drawer assembly into corresponding holes of large drawer right side and secure with 4 screws as shown. Repeat steps 4-6 for remaining small and large drawer assemblies. small drawer assemblies CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.