Assembly Instruction

Made in Vietnam - r06 Page 2 of 3
1 Fit dowels of left/right side panels into corresponding
holes of back panel, and fasten with 3 bolts, 3 spring
washers, and 3 flat washers per side panel as shown.
Secure, but do not over tighten, bolts with a phillips head
screwdriver.
BRIGHTON FOUR DRAWER CHEST
3 With the assistance of another adult, position unit
upright. Fit dowels of assembled unit into corresponding
holes of top panel, and secure with 10 bolts, 10 spring
washers, and 10 flat washers as shown.
top
panel
4 A) Fit pre-attached dowels of drawer front into
corresponding holes of drawer left side as shown.
Secure drawer front with 2 screws, using a phillips head
screwdriver. Do not over tighten the screws.
B) Attach drawer back with 2 screws as shown.
drawer
front
drawer left
side
drawer
back
2 Fit dowels of assembled unit into corresponding holes of
front frame, and fasten with 3 bolts, 3 spring washers, and
3 flat washers per side panel as shown.
A
B
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
front
frame
left side
panel
right side
panel
back
panel
NOTE: Do not
over tighten
the bolts
NOTE: Do not
over tighten
the screws