Assembly Instruction

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r06 Page 1 of 3

Thank you for purchasing the Brighton Four Drawer

Chest. This page lists the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

BRIGHTON FOUR DRAWER CHEST

2 - side panels

(1 left, 1 right)

4 - drawer

fronts

8 - drawer sides

(4 left, 4 right)

4 - drawer

bottoms

4 - drawer

backs

32 - screws22 - bolts

1 - front

frame

1 - back

panel

1 - top

panel

22 - flat

washers

22 - spring

washers

Missing hardware? Please call 800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

PAGE 1
BRIGHTON FOUR DRAWER CHEST ASSEMBLY HARDWARE 22 - bolts 22 - flat washers 22 - spring washers 32 - screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Brighton Four Drawer Chest. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BRIGHTON FOUR DRAWER CHEST NOTE: Do not over tighten the bolts left side panel front frame right side panel back panel 1 Fit dowels of left/right side panels into corresponding holes of back panel, and fasten with 3 bolts, 3 spring washers, and 3 flat washers per side panel as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver.
PAGE 3
BRIGHTON FOUR DRAWER CHEST drawer right side drawer bottom 5 Slide drawer bottom into corresponding grooves of drawer front and back as shown. 6 Fit dowels of drawer assembly into corresponding holes of drawer right side and secure with 4 screws as shown. Repeat steps 4-6 for remaining drawer assemblies. drawer assembly CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer.