Assembly Instruction

1 Fit dowels of back/front crossbars and top panel
into corresponding holes of right side frame as shown.
Secure back/front crossbars and top panel with 1 large
bolt, 1 spring washer and 1 flat washer as shown,
using an phillips head screwdriver. Do not over tighten
the bolts.
NOTE: Do not over
tighten the bolts
front back
crossbar
back
crossbar
top panel
A
B
right side
frame
2 Fit shelf into assembly unit as shown. Secure shelf to
right side frame with 2 large bolts, 2 spring washers
and 2 flat washers as shown, using a screwdriver.
3 A) Fit dowels of back/front crossbars and top panel
into corresponding holes of left side frame as shown.
Secure back/front crossbars and top panel with 1 large
bolt, 1 spring washer and 1 flat washer.
B) Secure shelf to left side frame with 2 large bolts, 2
spring washers and 2 flat washers.
left side
frame
A
4 A) Attach back panel cover to back panel with 1 small
bolt and 1 threaded bolt cap as shown, using a screw-
driver.
B) With the assistance of another adult, position assembled
unit upright. Attach 1 back panel with 15 small screws as
shown, using a phillips head screwdriver. Do not over
tighten the screws.
back
panel
back
panel cover
B
A
A
B
threaded
bolt cap
small
bolt
NOTE: Do not over
tighten the screws
Made in Vietnam - r03 Page 2 of 5
BREY FILE
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
shelf