Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Brey Filing Cabinet

Made in Vietnam - r03 Page 1 of 5

Thank you for purchasing the Brey File. This page lists

all the contents included in the box. Please take time to

identify the hardware as well as the individual compo-

nents of this product. As you unpack and prepare for

assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this product.

BREY FILE

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - shelf1 - top panel

1 - threaded

bolt cap

2 - pulls

2 - side frames

(1 left, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

(We recommend the use of hand tools instead of power tools)

10 - spring

washers

10 - large

bolts

10 - flat

washers

COMPONENTS

1 - back panel 2 - drawer

bottoms

1 - back

panel cover

1 - glass top

2 - large

drawer sides

(1 left, 1 right)

1 - large

drawer front

2 - file rails

15 - small

screws

2 - crossbars

(1 back, 1 front)

1 - large

drawer back

2 - small

drawer sides

(1 left, 1 right)

1 - small

drawer front

1 - small

drawer back

1 - small

bolt

4 - pull

bolts

Missing hardware?

Please call 800.606.6387 for replacements.

phillips head screwdriver

20 - large

screws

4 - bumpers

Summary of content (5 pages)

PAGE 1
BREY FILE ASSEMBLY HARDWARE 10 - spring washers 10 - flat washers 1 - small bolt 4 - pull bolts 15 - small screws 20 - large screws 1 - threaded bolt cap 10 - large bolts 4 - bumpers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Brey File. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
BREY FILE NOTE: Do not over tighten the bolts back crossbar front back crossbar shelf top panel right side frame 1 Fit dowels of back/front crossbars and top panel into corresponding holes of right side frame as shown. Secure back/front crossbars and top panel with 1 large bolt, 1 spring washer and 1 flat washer as shown, using an phillips head screwdriver. Do not over tighten the bolts. 2 Fit shelf into assembly unit as shown.
PAGE 3
BREY FILE A pull pull bolt small drawer front drawer bottom A small drawer back right small B drawer side 5 A) Attach 1 pull to small drawer front with 2 pull bolts as shown, using a screwdriver. B) Fit dowels of small drawer front and back into corresponding holes of right small drawer side. Secure right small drawer side with 4 large screws as shown, using a screwdriver. 6 Slide drawer bottom into corresponding grooves of drawer assembly as shown.
PAGE 4
BREY FILE drawer bottom large drawer front left large drawer side large drawer back 9 Slide drawer bottom into corresponding grooves of drawer assembly as shown. Standard Hanging Files Make sure file rail is inserted into inner slot 10 Fit dowels of large drawer front and back into corresponding holes of left large drawer side. Secure left large drawer side with 6 large screws as shown, using a screwdriver.
PAGE 5
BREY FILE small drawer assembly 12 Fully extend drawer glides from file assembly. Fit drawer glides of small and large drawer assembly into corresponding drawer glides of file assembly as shown. Push each drawer assembly forward and listen for a click to ensure that assembly is secure. large drawer assembly glass top A CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer.