Assembly Instruction

BREY DESK
Made in Vietnam - r05 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 Secure left and right leg frames to desktop with
6 small bolts, 6 spring washers and 6 flat washers
per side as shown, using an allen wrench.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer. Clean glass with
glass cleaner and a lint free cloth.
6 With the assistance of another adult, position desktop
assembly upright. Fully extend glides of desktop assembly.
Fit glides of keyboard tray assembly into corresponding
glides of desktop assembly as shown.
keyboard tray
assembly
desktop
assembly
NOTE: Do not over
tighten the screws
glass top
desktop
7 A) Adhere 4 bumpers to assembly as shown.
B) Carefully slide glass top into corresponding grooves of left and
right leg frames as shown.
Assembly is now complete.
A
A
B
NOTE: While sliding glass top
into grooves, lift glass top slightly
to avoid moving installed bumpers.