Assembly Instruction

left leg
frame
left and right
leg frame
B
C
right leg
frame
crossbar
desktop
crossbar
CORRECTLY ASSEMBLED
SIDE VIEW DETAIL
Made in Vietnam - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
BREY DESK
Page 2 of 3
2 Insert 1 screw post into right leg frame and secure with
a flat head screwdriver. Note: Make sure to align slot on
top of screw post parallel to leg. Do not over tighten screw
posts. Repeat for left leg frame.
3 Insert 2 barrel nuts into the crossbar as shown.
Use a flat head screwdriver to align the hole on the side
of the barrel nut with the hole on the end of the crossbar.
NOTE: Do not over
tighten the bolts
4 A) Fit dowels of crossbar and screw posts of
left and right leg frames into corresponding
holes as shown. Make sure hole in screw post
aligns with hole in the top of the crossbar.
B) Secure crossbar to left and right leg
frames by inserting a set screw into each
barrel nut. Tighten with a phillips head screw-
driver, making sure set screw securely engages
the screw post of the leg frame.
C) With the assistance of another adult, fit
dowels of left and right leg assembly into
corresponding holes of desktop. Secure left
and right leg frames to desktop with 2 large
bolts, 2 spring washers and 2 flat wasters per
side, using an allen wrench. Do not over
tighten the bolts.
NOTE: Do not over
tighten screw posts
NOTE: Make sure to align slot
of screw post parallel to leg
C