Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Brey Bookcase

Made in Vietnam - r02 Page 1 of 5

Thank you for purchasing the Brey Bookcase. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

BREY BOOKCASE

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

3 - middle

back crossbars

1 - top back

crossbar

1 - top

back panel

1 - top panel

2 - side frames

(1 left, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

(We recommend the use of hand tools instead of power tools)

20 - spring

washers

20 - bolts20 - flat

washers

COMPONENTS

1 - top front

crossbar

1 - bottom

back crossbar

1 - bottom

front crossbar

3 - middle

front crossbars

2 - middle

back panels

1 - bottom

back panel

4 - glass shelves

56 - small

screws

4 - large

screws

16 - bumpers

WALL MOUNTING HARDWARE

Missing hardware?

Please call 800.606.6387 for replacements.

phillips head screwdriver

allen wrench (included)

4 - large

screws

4 - small

screws

2 - wall straps 4 - brackets 4 - plastic

anchors

A B

Summary of content (5 pages)

PAGE 1
BREY BOOKCASE ASSEMBLY HARDWARE 20 - spring washers 16 - bumpers 20 - flat washers 4 - large screws 56 - small screws 20 - bolts Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE 2 - wall straps 4 - small screws Thank you for purchasing the Brey Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
BREY BOOKCASE 1 Fit dowels of top, middle and bottom front and back crossbars into corresponding holes of left side frame as shown. Secure each crossbar with 1 bolt, 1 spring washer and 1 flat washer, using an allen wrench. Do not over tighten the bolts.
PAGE 3
BREY BOOKCASE 3 Place 1 bottom back panel, 2 middle back panels and 1 top back panel to assembly as shown. Secure back panels with 56 smalls screws using a phillips head screwdriver. Do not over tighten the screws. NOTE: Do not over tighten the screws bottom back panel middle back panel M middle back panel L top back panel L K 4 Attach 1 top panel to assembly with 4 large screws as shown, using a screwdriver. I top panel Made in Vietnam - r02 Customer Service 800.967.
PAGE 4
BREY BOOKCASE 5 A) With the assistance of another adult, position unit upright. Adhere 16 bumpers to assembly as shown. B) Carefully fit 4 glass shelves into unit as shown. Make sure each shelf is fully supported by crossbars. Assembly is now complete. A J B glass shelf J glass shelf J glass shelf J glass shelf A CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective lacquer.
PAGE 5
BREY BOOKCASE WALL MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. The following instructions are for drywall mounting only.