Assembly Instruction

Made in Thailand r04 Page 2 of 3
3 A) With the assistance of another adult, carefully place the
right side panel into position. Secure front and back rails
with 2 bolts and fully tighten with the allen wrench.
B) Insert 4 wood dowels into the top of each leg.
4 With the assistance of another adult, carefully place
assembly upright. Fit top panel onto dowels on the top of
each leg. Attach back panel to top with 3 wood screws.
Attach each side panel to top with 2 bolts.
BOULEVARD II 4 DRAWER CHEST
1 Place left side panel face down on a padded surface.
Place the front and back rails into position as shown and
attach with 1 bolt per rail. Secure, but do not over tighten
each bolt with the allen wrench.
2 Place back panel into position and attach with 3 wood
screws. Secure with a phillips head screwdriver.
NOTE:
Do not over
tighten
the bolts
Back Rail
Front Rail
B
A
Customer Service 800.967.6696 | www.crateandbarrel.com