Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD 4 DRAWER CHEST

Made in China 2004

Page 3 of 5

8 • Place top panel into position, fitting dowels in side

panels into corresponding holes in the top. Secure top with

6 short machine screws, 6 spring washers, and 6 small

flat washers.

• Secure back panel to bottom with 2 short machine

screws, 2 spring washers and 2 small flat washers.

5 • Insert 2 wood dowels into top of base frame.

• Insert 7 short machine screws, 7 spring washers and

7 small flat washers through the holes in base frame and

align with threaded holes in the underside of the the bottom

panel. Secure screws with a screwdriver.

6 Secure 4 legs to base frame with 8 long machine

screws, 8 spring washers and 8 large flat washers.

x 6

x 2

x 7

7 With the assistance of another adult, place the case

assembly in an upright position.

x 8

NOTE:

Make sure label on

base frame faces upward.