Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
BOULEVARD 4 DRAWER CHEST
Made in China 2004
Page 2 of 5
3 Fit dowels of middle panel and back panel into
corresponding holes and slot in right side panel. Secure
with 2 short machine screws, 2 split washers and
2 small washers.
4 Fit bottom panel onto dowels in side panels and
bottom of back panel. Secure with 4 long wood screws.
1 Attach middle panel to left side panel with 2 short
machine screws, 2 spring washers and 2 small flat
washers. Tighten with a phillips head screwdriver.
2 With the assistance of another adult, slide the back
panel into the slot at the rear of the side panel.
Make sure the
wheels face forward
and the slot is at
back of the
side panel
x 2
x 2