Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Boulevard Four-Drawer Chest

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD 4 DRAWER CHEST

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in China 2004

Page 1 of 5

Thank you for purchasing the Boulevard 4 drawer chest.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

1 - back panel

1 - leg base

2 - side

panels

1 - top panel

2 - small

drawer backs

4 - small

drawer sides

4 - drawer

bottoms

2 - small

drawer fronts

19 - small

flat washers

2 - large

drawer backs

4 - large

drawer sides

2 - large

drawer fronts

8 - large

flat washers

1 - bottom panel

(Pilot holes on the underside)

4 - legs

4 - metal pulls

4 - drawer

supports

4 - long

wood screws

8 - oval

head screws

48 - short

wood screws

19 - short

machine screws

8 - long

machine screws

1- middle

panel

27 - spring

washers

2 - wood

dowels

Summary of content (5 pages)

PAGE 1
BOULEVARD 4 DRAWER CHEST HARDWARE 19 - short machine screws 48 - short wood screws Thank you for purchasing the Boulevard 4 drawer chest. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BOULEVARD 4 DRAWER CHEST x2 Make sure the wheels face forward and the slot is at back of the side panel 1 Attach middle panel to left side panel with 2 short machine screws, 2 spring washers and 2 small flat washers. Tighten with a phillips head screwdriver. 2 With the assistance of another adult, slide the back panel into the slot at the rear of the side panel. x2 3 Fit dowels of middle panel and back panel into corresponding holes and slot in right side panel.
PAGE 3
BOULEVARD NOTE: Make sure label on base frame faces upward. 4 DRAWER CHEST x7 5 • Insert 2 wood dowels into top of base frame. • Insert 7 short machine screws, 7 spring washers and 7 small flat washers through the holes in base frame and align with threaded holes in the underside of the the bottom panel. Secure screws with a screwdriver. x8 6 Secure 4 legs to base frame with 8 long machine screws, 8 spring washers and 8 large flat washers.
PAGE 4
BOULEVARD 4 DRAWER CHEST Make sure the wheels of the drawer slides face out and towards the back 9 Using 4 short wood screws per panel, attach the small and large drawer sides to the small and large front and backs. 10 Slide 4 drawer bottoms into the slots at the base of the drawer side, front and back panels. 11 Fit the remaining small and large drawer side panels into position, securing with 4 short wood screws per panel.
PAGE 5
BOULEVARD 4 DRAWER CHEST 13 Turn all the drawers upside down. Attach 1 drawer support to the bottom of each drawer with 4 short wood screws. Repeat for the remaining 3 drawers. 14 Insert drawers into the case, fitting wheels on drawer assemblies into the metal tracks of the case drawer slides. Assembly is now complete. CLEANING AND CARE Clean wood surfaces with a damp cloth. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 15 Assembly is now complete.