Assembly Instruction

Made in Thailand - r05 Page 3 of 4
BELMONT HIGH DINING TABLE
6 With the assistance of another adult, place tabletop onto a
clean, padded surface. Holding assembled unit from bottom
shelf and left side panel, place assembled unit onto tabletop
as shown. Fit cam screws of assembled unit into correspond-
ing holes of tabletop. Secure all cams.
9 With the assistance of another adult, hold base
assembly and position unit upright as shown. Do not use
tabletop leaves to position unit upright. Push pins of right
door front in as shown and position into unit. Release
pins to secure. Repeat for left door front.
Assembly is now complete.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
right side
panel
right door
front
left door
front
7 A) Fit cam screws of right side panel into corresponding
holes of assembled unit shown. Secure all cams.
B) Secure right side panel to assembled unit with 4 bolts as
shown.
B
tabletop
8 Secure left and right side panels to tabletop with 4 bolts
per side as shown.
A
B
B
NOTE: Do not hold
assembled unit
at top shelf
NOTE: Do not use
tabletop leaves to
position unit upright
pin