Assembly Instruction

Made in Thailand - r05 Page 2 of 4
BELMONT HIGH DINING TABLE
2 A) Insert 4 cams into top shelf as shown. Make sure
arrows on each cam points toward the nearest edge with
holes.
B) With the assistance of another adult, place tabletop onto a
clean, padded surface and insert 4 cams into each apron of
tabletop as shown.
3 Fit pre-assembled dowels of bottom shelf into corre-
sponding holes of left side panel as shown. Secure
bottom shelf with 2 bolts using an allen wrench. Do not
over tighten the bolts.
NOTE: Make sure each cam
points toward the nearest
edge with holes
top shelf
tabletop
bottom shelf
left side
panel
4 Fit pre-assembled dowels of middle shelf into
corresponding holes of assembled unit and secure with 2
bolts as shown.
5 Fit pre-assembled dowels of top shelf into correspond-
ing holes of assembled unit. Secure top shelf by turning
each cam clockwise until it securely engages each cam
screw, using a phillips head screwdriver.
middle shelf
top shelf
NOTE: Do not over
tighten the bolts
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com